background image
Home arrow Safe - Lock™ T-Grid Systems arrow Construction Instructions

Construction Instructions

Construction and Assembly Instructions for Safe Lock™ Tee-Grid Suspension Systems

"CLIP IN" System 'D' Assembly - Disassembly

assembly of Tee profile
1. ASSEMBLY OF TEE PROFILES
We clip every Tee profile ALWAYS ON THE LEFT SIDE of the hole (slot) and hear the characteristic clicking sound.
The blue Tee profile to the blue slot and the red Tee profile to the red slot.
disassembly of Tee profiles
2. DISASSEMBLY OF TEE PROFILES

A. NO tool needed.
B. We press our left thumb at the Tee profile end and at the same time with the right hand we hold against the thumb while pulling the Tee profile.

disassembly the main runners
3. DISASSEMBLY OF MAIN RUNNERS
A. For the disassembly we use a fine-tipped screwdriver.
B. We place the screwdriver as in the drawing, on both sides of the guide connections to loosen the clip security.
C. Pulling with our hands we disassemble the main runners.

CONSTRUCTION

CONSTRUCTION PLAN
1. Main Runner
2. Cross Tee
3. Cross Tee
4. Wall Angle
5. Ceiling Panel
6. Double Butterfly
7. Hanger ø4mm

Maximum distance between suspension points along the length of Main Runners:

  • - 0.45m from the wall
  • - 1.20m along the length of main runners
  • - 0.15m from the point the two main runners join

Last Updated Monday, 22 September 2014
Consulting by DARNEL ad
Copyright (C) 2008 Security Aluminum S.A. All rights reserved.